| Processor |
- 2x 3rd Gen Intel Xeon Scalable Processors
- Up to 40 cores
- TDP ratings up to 270W
- 64x PCIe 4.0 lanes per processor
|
- 2x 4th Gen Intel Xeon Scalable Processors
- Up to 60 cores
- TDP ratings up to 350W
- 80x PCIe 5.0 lanes per processor
|
- Significant increase in cores per processor
- Increased performance
- Consolidation of more apps on same number of servers, reducing costs
- New PCIe 5.0 support means higher performance networking and NVMe storage
|
| Memory |
- DDR4 memory operating up to 3200 MHz
- 8 channels per CPU
- 32 DIMMs (16 per processor), 2 DIMMs per channel
- Supports RDIMMs and 3DS RDIMMs
- Up to 8TB of system memory
- Intel Optane Persistent Memory 200 Series
|
- DDR5 memory operating up to 4800 MHz
- 8 channels per CPU
- 32 DIMMs (16 per processor), 2 DIMMs per channel
- Supports RDIMMs, 3DS RDIMMs and 9×4 RDIMMs
- Up to 8TB of system memory
- No support for Intel Optane Persistent Memory
|
- New DDR5 memory offers significant performance improvements over DDR4
- Support for lower-cost 9×4 DIMMs
|
| Internal storage |
- Front: 4x 3.5” SAS/SATA or AnyBay hot-swap drive bays
- Front: Up to 8x SAS/SATA hot-swap drives bays
- Front: 10x 2.5” SAS/SATA/NVMe (up to 4 AnyBay or 10x NVMe)
- Front: 16x E1.S EDSFF NVMe hot-swap drive bays
- Rear: Up to 2x 2.5’” SAS/SATA or NVMe hot-swap drive bays
- Rear: 2x 7mm SATA or NVMe hot-swap drive bays, optional RAID
- 12x Onboard NVMe ports
- 2x Internal M.2 with optional RAID
|
- Front: 4x 3.5” SAS/SATA hot-swap drive bays
- Front: Up to 8x SAS/SATA hot-swap drives bays
- Front: 10x 2.5” SAS/SATA/NVMe (up to 4 AnyBay or 10x NVMe)
- Front: 16x E1.S EDSFF NVMe hot-swap drive bays (planned support for E3.S drives)
- Front: 4x 2.5″ SAS/SATA + 3x PCIe slots (LP, FH, OCP)
- Rear: Up to 2x 2.5’” SAS/SATA or NVMe hot-swap drive bays
- Rear: 2x 7mm SATA or NVMe hot-swap drive bays (RAID support via VROC)
- 16x Onboard NVMe ports
- 2x Internal M.2 with optional RAID 1 (RAID support via VROC)
|
- Flexible storage offerings
- Support for up to 12x 2.5″ NVMe drives
- Planned support for E3.S EDSFF drives
- New front PCIe slots configuration
- No support for M.2 with RAID
- No support for 4x 3.5″ AnyBay drive bays
- Additional NVMe ports means no need for Retimer adapters, freeing up slots for other adapters
|
| RAID |
- 8-port and 16-port RAID adapters with up to 8GB flash
- Support for Lenovo and Broadcom adapters
- Support for PCIe or Internal cabled (CFF) form factor adapters
- Support for NVMe drives connected to 940 RAID adapters (Tri-Mode)
- Storage HBAs available
- PCIe 3.0 and PCIe 4.0 adapter choices
|
- 8-port and 16-port RAID adapters with up to 8GB flash
- Support for Lenovo and Broadcom adapters
- Support for PCIe or Internal cabled (CFF) form factor adapters
- Support for NVMe drives connected to 940 RAID adapters (Tri-Mode)
- Storage HBAs available
- PCIe 3.0 and PCIe 4.0 adapter choices with support for Gen 5 adapters when available
|
- Consistent RAID/HBA support
- Flexible config solution
- PCIe Gen 5 allows for greater storage performance
|
| Networking |
- OCP 3.0 slot with PCIe Gen 4 x16 interface (rear of server)
- Additional PCIe adapters supported
- 1GbE dedicated Management port
|
- OCP 3.0 slot with PCIe Gen 5 x16 interface (rear or front of server) (front OCP slot support planned for 2Q/2023)
- Additional PCIe adapters supported
- 1GbE dedicated Management port
|
- Improved performance with PCIe Gen 5
- Optional front-accessible OCP slot
|
| PCIe |
- Up to 3x PCIe Gen 4 slots (support up to 3x 75W GPUs)
- Supports either 3x slots (all LP) or 2x slots (LP + FH)
- FH slot connects to CPU 1 (slot 2)
- Additional OCP 3.0 slot
- Supports a RAID/HBA in CFF form factor (does not occupy a PCIe slot)
|
- Up to 2x PCIe Gen 5 slots + 1x PCIe Gen 4 slot (support up to 3x 75W GPUs)
- Supports either 3x slots (all LP) or 2x slots (LP + FH)
- FH slot connects to either CPU 1 (slot 2) or CPU 2 (slot 3)
- Additional OCP 3.0 slot
- Supports a RAID/HBA in CFF form factor (does not occupy a PCIe slot)
- Support for 3x front-accessible slots (2x PCIe + 1x OCP) with 4 drive bays (planned for 2Q/2023)
|
- PCIe Gen 5 allows for greater I/O performance
- Flexible PCIe offerings
- Front-accessible slots available
|
| Management and security |
- XClarity Controller
- Support for full XClarity toolset including XClarity Administrator
- Platform Firmware Resiliency (PFR) hardware Root of Trust (RoT)
- Tamper Switch security solution (intrusion switch)
|
- Integrated XClarity Controller 2
- Support for full XClarity toolset including XClarity Administrator
- Platform Firmware Resiliency (PFR) hardware Root of Trust (RoT)
- Tamper Switch security solution (intrusion switch)
|
- New XCC2 offers improved management capabilities
- Same system management tool with previous generation
- Silicon-level security solution
|
| Power |
- 500W, 750W, 1100W, 1800W AC Platinum/Titanium Hot Plug PSU
- 1100W -48VDC Platinum general support
- 240V HVDC support for PRC customers
- Active-Standby mode
|
- 750W, 1100W, 1800W AC Platinum/Titanium Hot Plug PSU
- 1100W -48VDC Platinum general support
- 240V HVDC support for PRC customers
- Active-Standby mode
|
|
Đánh giá
Chưa có đánh giá nào.